Toaster sized furnace melts platinum in a jiffy
Nicole Chidrawi
 A
miniature induction furnace, no bigger than a conventional toaster, is set to
revolutionise the jewellery industry. The unique furnace, which easily heats
platinum to its melting temperature of 1 800oC, is being tested at UCT's Centre
for Materials Engineering. Nicole Chidrawi, UCT Monday Paper reports.
Developed by Irshad Khan from the Centre for Instrumentation Research at the
Cape Technikon, in collaboration with UCT Professor Jon Tapson, the device is
being used to melt and process novel platinum alloys generated by Associate
Professor Candy Lang and other researchers at the centre.
The research team includes students from the electrical and mechanical
engineering departments at UCT as well as students from the electrical
engineering department at the Cape Technikon.
Most manufacturing jewellers currently make use of a blowtorch to melt
platinum, Khan explained.
The problem with this conventional method is that there is no control over
the heat. It can also contaminate the metal and allows for only a limited amount
of platinum to be melted each time.
"Our furnace uses induction heating in which a controlled high-frequency
magnetic field, similar to a microwave, induces electrical currents in the
platinum, resulting in rapid heating and melting," Khan added.
"By generating heat in the material itself, we have developed a system
that is faster (it takes only one minute to melt platinum using the furnace
compared to eight minutes using a blowtorch), cleaner and safer."
"The device also allows for a greater quantity of platinum to be melted.
At the moment, jewellers can melt approximately 40 grams of platinum using a
blowtorch. Our furnace can melt up to 150 grams of the metal at a time."
Khan and his team have employed groundbreaking technology to provide
energy-efficient melting using single-phase (domestic) electrical supply rather
than three-phase (industrial) supply. This means that while the furnace melts
the platinum in less time than it takes to boil your kettle, it uses exactly the
same power source.
"While gold melts at 1 000oC, melting platinum requires a lot more
power," said Khan. "Our device is extraordinary because it liquefies
the metal quickly without consuming a vast amount of energy. It is simply
plugged into a normal plug point."
Besides it melting abilities, the team have designed the apparatus to produce
high-quality platinum castings.
"Our aim with this project is to provide the small- to medium-scale
manufacturing jeweller with a portable, desktop induction furnace, which can not
only melt small quantities of platinum but can also cast between two to 12 rings
at a time," he said.
After the platinum has been liquefied, it is then poured into a flask where a
centrifugal spin-casting system distributes the metal into a mould.
Once it has cooled down, the metal is hammered out of the mould and a
platinum tree (a circle of metal with branches of rings attached) is produced.
According to Khan, casting prototypes have already been tested by certain Cape
Town jewellers and the system has been well received.
"We have used state-of-the-art technology to produce a user friendly
system. Operating the device has been simplified so that the end user can
communicate with the machine straight away."
While induction has traditionally been used to melt large quantities of steel
and aluminium in the industrial sector, the newly developed furnace is unique in
its ability to melt very small quantities of metal in the jewellery industry.
It is also the first tabletop system that combines both melting and casting
processes.
"Another inimitable characteristic of our device is that it empowers the
small-scale jeweller to produce precision castings comparable to those of their
large-scale competitors. It allows them to produce a once-off ring while
minimising wastage.
"The machine utilises high-speed, solid-state power semiconductor
electronics, making it very efficient and reliable. It will therefore require no
maintenance and there is little chance of it breaking down," Khan added.
The first complete prototype is expected to be ready for testing in industry
by the end of March next year.
In another coup for the team, this UCT led project has been awarded an
Innovation Fund grant of R5.6-million over the next three years.
More information:
Article courtesy of the UCT Monday Paper
|
